Infragravity waves are surface waves with relatively longer periods in comparison to periods of the spectrum-dominant gravity waves. They are characterized by oscillations between 20 and 300 seconds (0.0033 Hz < f < 0.05 Hz), amplitudes that range from a few millimeters to tens of centimeters, and wavelengths of kilometers (Munk, 1950; Holman and Bowen, 1982; Ardhuin et al., 2014). Their forcing is linked to, amongst others, nonlinear interaction between sea swell waves, varying wave heights causing the breaking point of the waves to vary with height, and height variation of incoming waves (Bertin et al., 2018). Infragravity waves play an important role in coastal dynamics (Svendsen, 2005) and have been reported to trigger nearshore hazards such as beach and dune erosion (de Vries et al. 2008; Roelvink et al., 2009), development of seiches in harbors (Melito et al., 2006; Cuomo and Guza, 2017), wave-driven coastal inundation (Gent, 2001; Stockdon et al., 2006), and ice shelves collapsing (Bromirski et al., 2010). Therefore, revealing infragravity wave characteristics is of utmost importance to understand their potential to generate hazards in a certain region, especially at sites strongly influenced by human occupation and activities. Their consideration in coastal safety planning can avoid damages, as several locations have already experienced in the past (Yamanaka et al., 2019). Implementing optimal sampling strategies for observing and characterizing infragravity waves might be challenging. By nature, these waves are hard to measure accurately due to their low amplitude. Their evolving characteristics in an environment marked by pronounced bathymetric features, such as the sand bank systems off the Belgian coast, add a degree of complexity that requires testing of different approaches, and at different sites. Within this context, this work first revisits observational approaches, instrumentation, logistics, and sampling techniques that have been used to study this phenomenon on the Belgian Coast. The advantages, challenges and limitations of different approaches are discussed, and best practices for collecting high-quality data in the field are addressed. To do so, this study explores multi-sensor in situ deployments conducted at four selected sites off the Belgian coast (Figure 1) (Nieuwpoort, Raversijde (inshore and offshore Stroombank), and Trapegeer) within the context of the “Influence of infragravity sea waves during storms on the hydro- and morphodynamic processes along hybrid soft-hard coastal defence structures with a shallow foreshore” project, an FWO-funded initiative being conducted in collaboration between UGent, VLIZ, and KULeuven and with support of Agency for Coastal and Maritime Services (AMDK). More specifically, field observations were conducted using multipurpose mooring frames equipped both with (i) Acoustic Doppler Current Profiles (ADCPs) to sample pressure (0.1% FS), current, and sea surface elevation through acoustic surface tracking and (ii) high-accuracy quartz pressure sensors (accuracy 0.01 % FS). Both ADCPs and pressure sensors were set to measure continuously at 4 Hz being, therefore, able to capture both infra- and gravity waves. Furthermore, the moorings were collocated with standard wave buoys from AMDK. Data was collected continuously for about 3 months, covering storm and calm wave conditions. Finally, the measurements from ADCPs (pressure and acoustic) and pressure sensors were compared and used to derive the infragravity wave characteristics, as well as cross-validated against wave buoy data.
Search from 250 M+ research papersSearch from 250 M+ research papers
Just Published
May 14, 2024
William Butler + 7
Open Access